Mounting Positions Of Components - Bosch Rexroth IndraDrive X Operating Instructions Manual

46/123
Mounting, dismounting and electrical installation

Mounting positions of components

Allowed mounting positions of the
components
Bosch Rexroth AG R911392532_Edition 01
IndraDrive X Drive Controllers Power Sections XCS1, XMD1,
NOTICE
Only operate the components in their allowed mounting positions.
Only the mounting position G1 is allowed for IndraDrive X components.
A, B, C Sides of a component: A = front side, B = left or right side,
C = top side
a Mounting surface in control cabinet
g Direction of gravitational force
G1 Normal mounting position: The natural convection supports the
forced cooling air current. This avoids the generation of pock‐
ets of heat in the component.
G2 180° to normal mounting position
G3 90° to normal mounting position
G4 Bottom mounting; mounting surface on bottom of control cabi‐
net
G5 Top mounting; mounting surface at top of control cabinet
Fig. 10-1: Allowed mounting positions of the components
Risk of damage to the components!
XMQ1