Intended Use - Bosch Rexroth IndraDrive X Operating Instructions Manual

IndraDrive X Drive Controllers Power Sections XCS1, XMD1,
XMQ1
4

Intended use

This product may only be used for the mentioned applications under the
specified application, ambient and operating conditions.
This product is exclusively intended for use in machines and systems in an
industrial environment. This is to be understood as applications according to
IEC 60204-1 "Safety of machinery, Electric equipment of machines" and
NFPA 79 "Electrical Standard for Industrial Machinery".
Components of the IndraDrive X system are products of
Category C3 (with restricted distribution) in accordance with
IEC 61800‑3. This Category comprises EMC limit values for line-
based and radiated noise emission. Compliance with this
Category (limit values) requires the appropriate measures of
interference suppression to be used in the drive system (e.g.,
mains filters, shielding measures).
These components are not provided for use in a public low-
voltage mains supplying residential areas. If these components
are used in such a mains, high-frequency interference is to be
expected. This can require additional measures of interference
suppression.
Intended use
R911392532_Edition 01 Bosch Rexroth AG
13/123