Configuring The Flexpay Epp Mapping Tool - GILBARCO VEEDER-ROOT FlexPay Encrypting PIN Pad Start-Up Ans Service Manual

Using the FlexPay EPP Mapping Tool

Configuring the FlexPay EPP Mapping Tool

To configure the FlexPay EPP Mapping Tool, proceed as follows:
Select the required template from the options available (see
1
Click Config. The Config window appears.
2
Open and edit the items under "Edit File Filters", which can be selected in the combos when
3
opening or modifying an existing map.
Figure 3-31: Config Window
File Filters
4 Click Rebuild All to reset all viewing filters based on the files in the key map, after you select
one of the files from the directory in which key map files are present.
Note: This function will delete all previous filters and rebuild all filters based on the file
Perform steps
In "Communication", select the COM Port that the FlexPay EPP is connected to, from the list
5
of options available.
Note: The COM Port is used to connect the FlexPay EPP to the laptop containing the FlexPay
MDE-4784D FlexPay™ Encrypting PIN Pad Start-up and Service Manual · December 2011
names in the directory you select.
IMPORTANT INFORMATION
3 and 4 only if instructed to do so by a Gilbarco Support Associate.
EPP Mapping Tool application.
Start-up and Service
Figure 3-34 on page 40).
Page 37