Status Leds - Nuvation Energy NUV300-BC-12 Product Manual

4.4.6. Status LEDs

When the battery management system is powered up, the status LEDs on the modules provide
indication of the functional status of the module. A more detailed status may be accessible via the
Operator Interface.
4.4.6.1. Low-Voltage BMS
Fault
The Fault LED indicates that the Nuvation Energy BMS has detected a fault condition in the
system.
Activity
This LED on the Link-Out RJ-45 connector indicates that the Low-Voltage BMS is communicating
over the Link Bus.
4.4.6.2. Cell Interface
The 2 status LEDs on the face of the Cell Interface indicate the functional status of the module.
Activity
This LED indicates that the Cell Interface module has received a communication packet over the
Link Bus.
Fault
This LED is not used in normal operations. It is available to support on-site troubleshooting.
Document ID: NE-PM-002
Nuvation Energy Low-Voltage BMS - Product Manual
48 Rev 1.2, 2021-03-03
Curie Update 1