Thermistor Temperatures - Nuvation Energy NUV300-BC-12 Product Manual

Figure 52. Cell Voltages with open wires accordion in Details Tab
6.2.5.1. Filtering
You can filter the display to cells with voltages above or below a value you specify.

6.2.6. Thermistor Temperatures

The Thermistor Temperatures accordion lists temperature measurements for all Thermistors
configured in the Configuration file. Thermistors that are not configured are displayed as a dash.
Temperatures in red indicate measurements which have triggered a Nuvation Energy BMS fault.
There is no differentiation between thermistors that are in the normal operating temperature range
and thermistors that have triggered a Nuvation Energy BMS warning.
For Low-Voltage BMS systems, CI1 refers to the Low-Voltage BMS module. If a Cell

Interface expansion module is installed, then CI2 would refer to the first Cell
Interface installed.
Document ID: NE-PM-002
Figure 51. Cell Voltages accordion in Details Tab
Figure 53. Thermistor accordion in Details Tab
Nuvation Energy Low-Voltage BMS - Product Manual
70 Rev 1.2, 2021-03-03
Curie Update 1