Table of Contents
Advertisement
5.2. Status LEDs
The status LEDs provide an indication of the functional status of the G5 Stack Switchgear and G5 Cell
Interface A more detailed status may be accessed via the G5 Operator Interface.
5.2.1. G5 Stack Switchgear Status LEDs
The two LEDs on the front panel of the G5 Stack Switchgear indicate health and functional status to
the user.
Power LED
The
POWER
LED (green) indicates that the system is powered on (AC power is provided and the
AC power input breaker is closed).
Fault LED
The
FAULT
LED (red) indicates that the system is in a fault state and requires attention to become
operational. The Operator Interface's fault page can be used to find the nature of the fault.
Ethernet LEDs
There are two LEDs on the left side of the connector labelled 'Ethernet' on the G5 Stack
Switchgear.
The upper LED is the Activity LED. A solid light means a connection between the devices. The LED
will flash whenever data is being transmitted. No light means that there is no current connection.
The lower LED is the Line Speed indicator for Ethernet data speeds. It will be orange for 10 Mbit
and green for 100 MBit line speeds.
Link Out LEDs
There are two LEDs on the right side of the connector labelled 'Link Out' on the G5 Stack
Document ID: NE-DS-011
Nuvation Energy G5 High-Voltage BMS - NUVG5 Product Manual
Figure 23. Fault and Power LEDs
Figure 24. Ethernet and Link Out LEDs
42
Rev 1.0, 2023-05-19
G5 Faraday
Advertisement
Table of Contents
