Upgrading The Nuvation Energy Bms; Upgrading The Firmware - Nuvation Energy NUV300-BC-12 Product Manual

5.3. Upgrading the Nuvation Energy BMS

The Operator Interface is packaged with the appropriate version of Nuvation Energy BMS firmware.
The firmware for Nuvation Energy BMS can be upgraded using the Operator Interface.
To upgrade the firmware Nuvation Energy BMS must be in Service Lockout. Please see
more details.

5.3.1. Upgrading the Firmware

The Upgrade option will be available when Nuvation Energy BMS successfully enters Service Lockout. If
a newer firmware version is available, proceed with the firmware upgrade.
Backup the Config file
The firmware upgrade will erase the configuration file on your Nuvation Energy

BMS. If this is not a new install and you have a configuration file loaded on your
Nuvation Energy BMS, please remember to export and save it. You can import
this file after the upgrade is complete. If upgrading to a new firmware version,
you may need to edit the file for compatibility before uploading it.
1. Click the Upgrade button to begin the upgrade. A progress bar allows you to monitor the upgrade
process.
2. Wait until a dialog box appears with the upgrade result. It should indicate that the firmware
upgrade is complete.
3. Once the upgrade is successful, you will be returned to the dashboard. Nuvation Energy BMS will
remain in Service Lockout.
Document ID: NE-PM-002
Nuvation Energy Low-Voltage BMS - Product Manual
53
Section 6.5 for
Rev 1.2, 2021-03-03
Curie Update 1