Table of Contents
Advertisement
5.4. Generate a Configuration File
Your Nuvation Energy BMS needs a valid configuration file to operate. The Operator Interface
provides tools for importing and exporting configuration files to and from Nuvation Energy BMS as a
way to set or retrieve the state of all configuration registers.
To generate a configuration file, visit the nCloud at: https://ncloud.nuvationenergy.com. nCloud is
the Nuvation Energy online portal to remote battery management.
In the nCloud, configuration files can be generated and retrieved from the Configurations menu option
by following these steps:
1. Click Create New Configuration
2. Follow the instructions in the Quick Start Wizard.
3. Download the .config configuration file
4. Store the configuration file on the computer running the Operator Interface.
If your Nuvation Energy BMS is connected to a computer that doesn't have internet
access, you can use a USB stick to transfer the configuration file between computers.
5.4.1. Fine-tuning the Configuration File (optional)
This is an optional step. If you would like to further adjust your Nuvation Energy BMS settings, to
meet the requirements of your particular system, you may choose to edit the configuration file. Refer
to the
Section 7
for details on how to modify the configuration file for your setup.
Document ID: NE-PM-002
Figure 41. Configuration screen in the nCloud
Nuvation Energy Low-Voltage BMS - Product Manual
55
Rev 1.2, 2021-03-03
Curie Update 1
Advertisement
Table of Contents
Troubleshooting
