Campbell CDM-A100 Series Instruction Manual page 6

PLEASE READ FIRST
About this manual
Please note that this manual was originally produced by Campbell Scientific Inc. (CSI) primarily
for the US market. Some spellings, weights and measures may reflect this origin.
Some useful conversion factors:
Area:
Length:
Mass:
Pressure:
Volume:
In addition, part ordering numbers may vary. For example, the CABLE5CBL is a CSI part
number and known as a FIN5COND at Campbell Scientific Canada (CSC). CSC Technical
Support will be pleased to assist with any questions.
About sensor wiring
Please note that certain sensor configurations may require a user supplied jumper wire. It is
recommended to review the sensor configuration requirements for your application and supply the jumper
wire is necessary.
2
1 in (square inch) = 645 mm
1 in. (inch) = 25.4 mm
1 ft (foot) = 304.8 mm
1 yard = 0.914 m
1 mile = 1.609 km
1 oz. (ounce) = 28.35 g
1 lb (pound weight) = 0.454 kg
1 psi (lb/in2) = 68.95 mb
1 US gallon = 3.785 litres
2