References - Campbell CDM-A100 Series Instruction Manual

12. References

SC-CPI
A CPI Communication interface that is required when using a CR800-Series,
CR1000, or CR3000 datalogger in CPI network.
Sequential Mode
A mode of processing a program which executes instructions in the sequence in
which they are written in the program. After a measurement is made, the result
is converted to a value determined by processing arguments that are included in
the measurement command, and then program execution proceeds to the next
instruction. The datalogger automatically sets the processing mode according
to the instructions in the program; however, it can be forced to sequential mode
by using the SequentialMode instruction at the beginning of the program.
Campbell Scientific. 2015. CR6 measurement and control system: Operator's
manual. Campbell Scientific.
https://s.campbellsci.com/documents/us/manuals/cr6.pdf
Campbell Scientific. 2012. 4WFBS120, 4WFBS350, 4WFBS1K 4 wire full
bridge terminal input modules: Instruction manual. Campbell Scientific.
https://s.campbellsci.com/documents/us/manuals/4wfbs.pdf
Madsen, C. and Cornelsen, S. 2014. Designing physical network layouts for the
CPI bus [White paper]. Campbell Scientific.
https://s.campbellsci.com/documents/us/technical-papers/cpi-bus.pdf
CDM-A100 Series
33