End Of The Treatment; Powder And Water Purge - EMS AIR-FLOW MASTER Operation Instructions Manual

END OF THE TREATMENT

Powder and water purge

Purge ON
Remove the powder chambers before switching the unit off and store them in a dry place.
The powder should not remain over a determined time inside the powder chamber. Read the
instructions delivered with the powders.
After each treatment a purge is necessary to remove all residues of powder and liquid inside the
cords and the handpieces. During a prolonged stop of the unit, it is important to empty the irrigation circuit
to avoid the formation of biofilm.
54
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 54
1x
1
2
07.02.2018 14:50:18