Purge Switch And Mode - EMS AIR-FLOW MASTER Operation Instructions Manual

Purge switch and mode

The purge switch allows to depressurize the powder chambers for safe removal. It also controls the
"purge" function (see following pages).
Beeps will be emitted when the purge switch is pressed and the powder chamber lights will blink. After
approximately 1 minute the unit will return to its previous configuration (or when pressing the switch a
second time).
50
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 50 07.02.2018 14:50:10