Filling The Powder Chambers - EMS AIR-FLOW MASTER Operation Instructions Manual

Filling the powder chambers

AIR-FLOW CLASSIC+SOFT
®
POWDER CHAMBER
Check the condition of the threads on the powder chamber, on the cap and on the O-ring seals.
Please refer to the information provided in the chapter "Maintenance".
Make sure that the powder chambers are absolutely dry. Moisture can cause the powder to cake
and provoke a blocking of the circuit.
To avoid clogging the unit do not fill the powder chambers above the line "Max". Pour the powder
into the AIR-FLOW CLASSIC+SOFT powder chamber. The AIR-FLOW PERIO+PLUS powder chamber
having a different design follow the instructions as shown above.
Put the powder diffuser back to its position as soon as you finish to fill the powder chamber.
28
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 28
AIR-FLOW PERIO+PLUS
®
POWDER CHAMBER
07.02.2018 14:49:48