User Tool Settings For Ieee 802.11A/G/N - Ricoh MP C6502SP Field Service Manual

2. Installation
• Make sure that the cables are not slack. Keep them wired tightly along the covers.
10. Turn on the main machine.
11. Make sure that the machine can recognize the option.: User Tools > Printer Features > List/Test Print
> Configuration Page
You may have to move the machine if the reception is not clear.
• Make sure that the machine is not located near an appliance or any type of equipment that
generates strong magnetic fields.
• Put the machine as close as possible to the access point.

User Tool Settings for IEEE 802.11a/g/n

Go into the User Tools mode and do the procedure below. These settings take effect every time the
machine is powered on.
• You cannot use IEEE 802.11a/g/n if you use Ethernet.
1. Press the "User Tools" key.
2. On the touch panel, touch "System Settings".
• Select "Interface Settings"> "Network" > "LAN Type". The "LAN Type" (default: Ethernet)
must be set for either Ethernet or wireless LAN.
3. Select "Interface Settings"> "Wireless LAN". Only the wireless LAN options show.
406