Check All Connections - Ricoh MP C6502SP Field Service Manual

3. Exit User Tools.
4. Check the operation.
• The machine will issue an SC165-00 error if the machine is powered on with the Copy Data
Security Unit Board removed and the "Data Security for Copying" feature set to "ON".
• The machine will issue an uncertain SC165-00 error if the machine is powered on with a
defective Copy Data Security Unit Board and the "Data Security for Copying" feature set to
"OFF".
• When you remove this option from the machine, first set the setting to "OFF" with the user tool
before removing this board. If you forget to do this, the "Data Security for Copying" feature
cannot appear in the user tool settings. And then SC165-00 will appear every time the
machine is switched on, and the machine cannot be used.
Make sure that the machine can recognize the option (see "Check All Connections" at the end of this
section).

Check All Connections

Make sure that the machine can recognize the option.
1. Plug in the power cord.
2. Turn on the main switch.
3. Enter the printer user mode. Then print the configuration page.
User Tools > Printer Features > List Test Print > Configuration Page
4. All installed options are shown in the "System Reference" column.
Copy Data Security Unit Type G (D640)
445