Correcting Skew - Ricoh MP C6502SP Field Service Manual

2. Installation
2. If a peripheral unit is connected on the left side, disconnect it and pull it away.
3. Execute a straight-through run.
4. Check the scale where each sheet exits.
• The rear scale is for DLT-size paper.
• The front scale [2] is for A3-size paper.
• Be sure to read the correct scale for the paper size in use.
[A]
[B]
[C]

Correcting Skew

1. Disconnect the multi folding unit from the upstream unit.
2. Remove the spacers from the multi folding unit.
292
Centered. No adjustment necessary.
Trailing edge skew to the front, total skew more than ±2 mm. Adjustment required.
Trailing edge skew to the rear, total skew more than ±2 mm. Adjustment required.