4. Replacement and Adjustment
3.
Harness Guide [A] (G x1, C x1)
• The left side screw is G ( HEXAGON HEAD BOLT WITH WASHER:M3X6), the right side
screw is C ( STEPPED SCREW:M3) in the picture above.
4.
Themostat (Pressure Roller) [A] (B x2)
Fusing Paper Feed Sensor
1.
Separate the fusing unit into the upper part and the lower part
Fusing
Unit").
2.
Pressure Roller Stripper Plate
810
(page 794 "Pressure Roller Stripper
(page 785 "Separating the
Plate")