Quick Start Guide
2
Wireless considerations
Power up sequence
The Emerson Wireless Gateway should be installed and functioning properly
before commissioning the Rosemount ET310C and powering it with a BP20E
power module.
Note
Wireless devices should be powered up in order of proximity from the
Gateway, beginning with the closest device, then working outward from the
Gateway. This results in a simpler and faster network formation. Enable
Active Advertising on the Gateway to ensure new devices are able to join the
network faster. For more information, see the
Gateway.
8
September 2022
Emerson Wireless 1410S
Emerson.com/Rosemount