Skoda Octavia II 2004 Workshop Manual page 156

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Octavia III 2013 ➤ , Octavia III ...
Gearbox 0AF - Edition 09.2013
1 - Lock washer
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
❑ Determine thickness
⇒ page 130
2 - Sliding sleeve with 5th gear
synchronizer body
❑ removing and installing
⇒ page 130
❑ disassembling
⇒ page 159
❑ Assemble sliding sleeve
and 5th gear synchron‐
izer body
❑ Fitting position
⇒ page 159
❑ on gearboxes as of pro‐
duction date 06.2009,
the springs (pos. 27) are
changed
3 - 5th gear synchronizer ring
❑ check for wear
⇒ page 156
4 - 5th gear sliding gear
5 - Needle bearing
❑ for 5th gear
❑ replace together with
bushing Pos. 6
6 - Bushing
❑ for 5th gear needle
bearing
❑ replace together with
needle bearing Pos. 5
❑ press off with bearing support/grooved ball bearing
❑ pressing on ⇒ page 158
7 - Gearbox housing
8 - Bearing support with grooved ball bearing
❑ Always replace grooved ball bearing together with the bearing support
❑ If the bearing support is released from the gearbox housing, it must always be replaced
❑ pressing off ⇒ page 154
❑ pressing on ⇒ page 158
9 - Drive shaft
10 - Needle bearing
❑ for 3rd gear
11 - 3rd gear sliding gear
12 - 3rd gear synchronizer ring
❑ On gearboxes as of production date 06.2009, the synchronizer ring is changed for 3rd and 4th gear ⇒
Electronic Catalogue of Original Parts
❑ check for wear ⇒ page 156
13 - Sliding sleeve with 3rd and 4th gear synchronizer body
❑ press off with 3rd gear sliding gear
152
Rep. gr.35 - Gears, shafts
⇒ page 154
⇒ page 155