Removing And Installing Master Cylinder (Octavia Iil) - Skoda Octavia II 2004 Workshop Manual

– Attach support -2- to the actuator rod -1- of the master cylinder.
– Place a spacer -A- between clutch pedal and stop and press
clutch pedal into operating position.
♦ Length of spacer = approx. 40 mm
– Lock master cylinder at bracket -arrow 1- and -arrow 2-.
– Press actuating rod -1- of master cylinder into direction of ar‐
row, until the support -2- locks audibly into the clutch pedal.
– Installing bracket ⇒ page 28
1.14 Removing and installing master cylinder
(Octavia IIl)
Removing
Note
Before the master cylinder must be replaced due to a fault, first
♦
of all carry out the test in the
hicle diagnostic tester.
When working in the footwell, protect the underbody cover with
♦
cloths from escaping brake fluid.
– Remove bearing bracket for clutch pedal
Octavia II 2004 ➤ , Octavia II 2010 ➤ , Octavia III 2013 ➤ , Octavia III ...
.
Targeted fault finding
⇒ page 30
Gearbox 0AF - Edition 09.2013
⇒ Ve‐
.
35
1. Repairing clutch control