34946A And 34947A Dual/Triple Microwave Switch Modules - Keysight Technologies 34946A User Manual

34946A and 34947A Dual/Triple Microwave Switch Modules

34946A and 34947A Dual/Triple
Microwave Switch Modules
The 34946A and 34947A modules provide single-pole, double-throw switches in
4 GHz, 20 GHz, and 26 GHz options. The 34946A and 34947A modules are also
available with no switches installed, but include cable kits that allow you to
connect switches internal/ external to the module chassis. The configuration
options of the modules are summarized below:
The 34946A and 34947A modules do not connect to the analog buses. Instead,
all connections are made through the visible SMA connectors via external cables.
Each connector on the modules is labeled with a three-digit number that
represents a channel you can control programmatically from the front panel or
from the Web UI.
Keysight 34946A-34947A Microwave Switch/Driver Modules User's Guide
34946A Dual 1x2 SPDT Terminated
Microwave Switch
Option 001: No switches installed
Option 004: 4 GHz switches installed
Option 020: 20 GHz switches installed
Option 026: 26 GHz switches installed
Supported Switches:
Keysight N1810UL Unterminated 3-port
SPDT
Keysight N1810TL Terminated 3-port SPDT
Keysight N1811TL Terminated 4-port
transfer
Keysight N1812UL Unterminated 5-port
transfer
Switch reference document number:
5968-9653E
34946A Option 001 contains cables and connectors to support two of the supported switches
listed above.
34947A Option 001 contains cables and connectors to support three Keysight N1810UL
switches.
34947A Triple 1x2 SPDT Unterminated
Microwave Switch
Option 001: No switches installed
Option 004: 4 GHz switches installed
Option 020: 20 GHz switches installed
Option 026: 26 GHz switches installed
Supported Switches:
Keysight N1810UL Unterminated 3-port
SPDT
Switch reference document number:
5968-9653E
7