Operational Verification Of The Modules; Run Keysight Io Libraries Connection Expert - Keysight Technologies M9101A Maintenance Manual

General Information

Operational Verification of the Modules

There are no specific programmable operational verification or self test
procedures for these modules. However, you can use the Soft Front Panel
software to open/close individual channels. This will verify that the module is
installed correctly and that the host controller can communicate with the
module. If the controller can communicate with one module but not another, the
PXIe interface circuitry on the module may be bad.
To control the modules -- that is open and close channel relays -- you must have
Keysight IO Libraries Suite installed (version 16.0 or later). IO Libraries Suite is
required for the IVI instrument drivers. Use the Keysight Soft Front Panel
interface to control the modules. Module drivers and the Soft Front Panel
software were provided on the Product and Information CD supplied with the
modules. Keysight IO Libraries version 16.0 (or later) must be installed prior to
installing and running any other software and prior to powering the chassis. The
latest version can be downloaded from: www.keysight.com/find/iosuite.

Run Keysight IO Libraries Connection Expert

- If Keysight Connection Expert is already running on the host controller, click
- If Connection Expert is not already running, run it now to verify your I/O
Locate your interfaces and instruments in the Keysight Connection Expert
Explorer Pane. The following graphic shows the Connection Expert screen.
11
the Refresh All button to identify any hardware you have just installed or
re-connected.
configuration. In the Windows Notification Area, click the IO icon then click
Keysight Connection Expert.
Keysight PXI Matrix and Multiplexer Switch Modules Maintenance Guide
Operational Verification of the Modules