Angelo Po 091CP1G Use And Installation Manual page 24

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the hatch (A).
3 - Unscrew the nozzle (B) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Close the door (A) when the operation is com-
plete.
To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Open the hatch (A).
3 - Unscrew the union (B).
4 - Remove the nozzle (C) and replace it with the
IT
one suitable for the type of gas in use (see table
at back of manual).
5 - Screw the union (B) back into place and close
AUS
the door (A) on completion of the operation.
DE
FR
ES
Important
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
work.
English
REPLACEMENT OF THE BURNER NOZZLE
REPLACEMENT OF THE PILOT LIGHT INJECTOR
DECOMMISSIONING THE APPLIANCE
A
A
Never dump non-biodegradable materials,
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
- 22 -
B
IDM-39614901800.tif
B C
IDM-39614901900.tif