Step 4:
Assembly of the handles
1.
Attach the handles (36) to the handlebar tube (29) by attaching the cover (42), washer (43),
spring washer (44), connector (45) and the adjusting knob (37).
2.
Connect the upper console cable (39) and the hand pulse cable (30) with their counterparts of
the console (38).
ड ATTENTNION
Pay attention to not pinch the cable during the next step.
3.
Attach the console (38) to the handlebar tube (29) with four screws (59).
NOTICE
L
The position of the handlebars can be adjusted by pressing the adjusting knob (37).
17