Assembly - CARDIOSTRONG CST-BX30-PLUS Assembly And Operating Instructions Manual

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of the front and back feet
Secure the front (3) and rear foot (2) to the base (1) with two screws (7), two washers (53), two spring
washers (51) and two nuts (6) each.
NOTICE
L
If the equipment is not stable after assembly, you can change the height on the underside of
the underside of the rear foot.
14
BX30 Plus