100/1000 Mbit/S F/O Port (Optional); Wan Port (Optional); Filling Out The Inscription Label - Hirschmann EAGLE20 User Manual

2.7.2

100/1000 Mbit/s F/O port (optional)

Verify that you connect LH ports only with LH ports, SX ports only with SX
ports, and LX ports only with LX ports.
 Connect the data cables according to your requirements.
See "Ethernet ports" on page 25.
2.7.3

WAN port (optional)

Note: In general, you should adhere to the following recommendations for
data cable connections in environments with high electrical interference
levels:
 Provide copper cabling to ensure sufficient distance between the power
supply cables and data cables. Ideally, install the cables in separate cable
channels.
 Use shielded cables.
2.8

Filling out the inscription label

The information field for the IP address helps you identify your device.
40
Installation EAGLE20/30
Release 12 03/2021