Connecting System; Upgrading Regius Console - Konica Minolta REGIUS 110 HQ Installation Manual

3.2

Connecting System

Connect the unit to the system.

3.2.1 Upgrading REGIUS Console

Upgrade the application program when the unit is connected to an existing CS-3 or CS-2 REGIUS
console in the system.
The following versions of the REGIUS console application support the unit.
•
CS-3 : V3.01 R00 or more
•
CS-2 : V1.40 R00 or more
Requirements
The procedures described in this manual require the following tools:
No.
1 CD containing the new version of the REGIUS console program
For information about the procedure for upgrading, refer to the REGIUS console Installation/Service
Manual.
This is the final step in the process of upgrading the REGIUS console.
Tools
3-3

3.2 Connecting System