Removing Protective Parts; Removing External Panels - Konica Minolta REGIUS 110 HQ Installation Manual

2.3

Removing Protective Parts

This machine incorporates protective parts to protect internal components from damage caused by
vibration experienced during transportation. Remove these protective parts (red parts).
Protective Parts
Fixture (red part)
Requirements
The procedures described in this manual require the following tools:
No.
1 Phillips head screwdriver

2.3.1 Removing External Panels

Remove the external panels to remove the protective parts (red parts) from the machine interior.
This is the final step in the process of removing the external panels.
Quantity
Six pieces
Tools
Back of the first front side
First front
side
2-11

2.3 Removing Protective Parts

1
Remove the first front back panel.
•
Seven screws (M4 × 8)
Hold the bottom of the panel with both hands and pull it
towards you to remove it.
2
Remove the first front panel.
• Six screws (M4 × 8)
Hold the bottom of the panel with both hands and pull it
towards you to remove it.