Removing Packing Materials - Konica Minolta REGIUS 110 HQ Installation Manual

2.2.2 Removing Packing Materials

Remove the cardboard outer case and moisture-proof bag.
1
While holding the fixing band in one hand, cut it
using a cutter.
•
Two fixing bands
Avoid standing right in front of the bands.
When a tightly stretched fixing band is cut, it
Caution
may hit the worker.
2
Cut the adhesive tape on the top and bottom of
the outer case using a cutter.
Be careful not to damage the items inside.
Caution
3
Open the upper part of the outer case and take
out the accessory bag.
The items in the accessory bag are checked
in "2.2.4 Checking Accessories"
Note
later.
4
Remove the following items that are placed
around the main unit.
•
One slope
•
Four pieces of buffer material
Do not discard the slope. It is used when
moving the main unit down to the floor.
Important
2-5
2.2 Unpacking
described