Replacing The Non-Return Valve In The Distributor Block; Replacing The Pressure Gauge; Replacing The Tubes; Replacing The Toggle Switch - Weinmann Oxygen MODULE Servicing And Repair Instructions

6.4.5 Replacing the non-return valve in the distributor block

See "6.2.5 Replacing the non-return valve in the distributor block" on page 19.
Important!
Please observe the exceptions for dismantling and assembling the housing under
• "6.4.3 Dismantling the housing" on page 29,
• "6.4.4 Assembling the housing" on page 29.

6.4.6 Replacing the pressure gauge

See "6.2.6 Replacing the pressure gauge" on page 20.
Important!
Please observe the exceptions for dismantling and assembling the housing under
• "6.4.3 Dismantling the housing" on page 29,
• "6.4.4 Assembling the housing" on page 29.

6.4.7 Replacing the tubes

See "6.2.7 Replacing the tubes" on page 21.
Important!
Please observe the exceptions for dismantling and assembling the housing under
• "6.4.3 Dismantling the housing" on page 29,
• "6.4.4 Assembling the housing" on page 29.

6.4.8 Replacing the toggle switch

See "6.2.8 Replacing the toggle switch" on page 22.
Important!
Please observe the exceptions for dismantling and assembling the housing under
• "6.4.3 Dismantling the housing" on page 29,
• "6.4.4 Assembling the housing" on page 29.

6.4.9 Replacing the quick-release coupling

See "6.2.9 Replacing the quick-release coupling" on page 22.
Important!
Please observe the exceptions for dismantling and assembling the housing under
• "6.4.3 Dismantling the housing" on page 29,
• "6.4.4 Assembling the housing" on page 29.
30
Combi MODULE