Status Led; On/Off Buttons; Dimmer Slider; Figure 11 - Clmd12 Control Tab - Maretron MPOWER CLMD12 User Manual

Figure 11 – CLMD12 Control Tab

3.5.7.1 Status LED

When lit, this read-only field indicates that the breaker is in the ON state. When dim, this field
indicates that the breaker is in the OFF state.

3.5.7.2 ON/OFF Buttons

The ON button allows you to switch the breaker into the ON state. The OFF button allows you
to switch the breaker into the OFF state.

3.5.7.3 Dimmer Slider

The blue slider bar allows you the configure the dimming level of a breaker between 5% and
100%. The read-only green bar graph shows the real-time dimming level of the breaker.
Revision 1.6 Page 27