Table of Contents
Advertisement
Option 2: Connect by splicing flying leads on pre-assembled connectors to existing
wires (this option does not require any specialized tools)
Description
Output (J1) Mating Connector with
12" flying leads
Input (J2) Mating Connector with
12" flying leads
2.3.2 Bypass Module
The loads controlled by the CLMD12 may be connected to a bypass module in the event of
communication loss or other malfunction. Please refer to section 4.4 for details.
Description
MPower 12 Channel DC Bypass
Module
2.4 Quick Install
Installing the Maretron CLMD12 involves the following steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 3.1)
2. Choose a mounting location (Section 3.2)
3. Mount the CLMD12 (Section 3.3)
4. Connect the CLMD12 (Section 3.4)
5. Configure the CLMD12 (Section 3.5)
2.5 Theory of Operation
The CLMD12 provides the ability to turn on or off DC power to a load circuit using 12
independent solid-state Electronic Circuit Breakers (ECB's). Each breaker contains protection
against overcurrent, overtemperature, and short circuit.
Each breaker in the CLMD12 may be manually switched on or off using any of the following
methods:
1) Maretron N2KView
2) Maretron N2KView
Monitoring and Control, or
3) Maretron N2KView
Control Touchscreen Computer, or
4) Maretron N2KView
5) a Maretron DSM-Series NMEA 2000
Revision 1.6
A3706
A3707
CBMD12
®
software running on a personal computer, or
®
software running on a Maretron MBB-Series Black Box for Vessel
®
software running on a Maretron TSM-Series Vessel Monitoring and
®
Mobile app running on an Android or iOS tablet or phone, or
®
Multi-function Color Graphic Display, or
Part Number
Part Number
Quantity
Required
1
1
Quantity
Required
1
Page 3
Advertisement
Table of Contents
