Table of Contents
Advertisement
CLMD12 User's Manual
The Maretron CLMD12 is designed to operate within the harsh demands of the marine
environment. However, no piece of marine electronic equipment can function properly unless
installed, configured, and maintained in the correct manner. Please read carefully and follow
these instructions for installation, configuration, and usage of the Maretron CLMD12 in order to
ensure optimal performance.
2.1 Firmware Revision
This manual corresponds to CLMD12 firmware revision 1.13.
2.2 CLMD12 Features
The Maretron CLMD12 has the following features.
• NMEA 2000
®
• Waterproof Connectors
• Sealed Waterproof Enclosure
• Opto-Isolated from NMEA 2000
• Twelve (12) Electronic Circuit Breakers (ECB's) for On / Off Control Over NMEA 2000
Network
• Each breaker Capable of Carrying Up to 5, 10, or 12 Amps
• Individual Breaker Electrical Current Monitoring
• Breakers can have power-up states defined (ON, OFF, or Previous states)
• Breakers can be locked against inadvertent actuation
• Seven (7) discrete inputs configurable as Active High, Active Low.
• Automatic ECB Overcurrent Shutdown
• Automatic ECB Thermal Shutdown (Overtemperature Protection)
2.3 Accessories
This section lists the accessories which are available for the CLMD12.
2.3.1 Connectors
There are two options for connecting the CLMD12 to the input and output channels:
Option 1: Connect by assembling connectors to existing wires (this option requires a
Deutsch HDT-48-00 crimp tool)
Description
J1 (Output) Mating connector
J1 (Output) Socket
J1 (Output) Wedge
J2 (Input) Mating connector
J2 (Input) Socket
J2 (Input) Wedge
Page 2
Interface
®
Eliminating Potential Ground Loops
Deutsch DT06-12SA
Deutsch 0462-209-16141 (14 AWG)
Deutsch W12S
Deutsch DT06-08SA-E003
Deutsch 0462-201-16141 (16 – 20 AWG)
Deutsch W8S
Part Number
®
Quantity
Required
1
12
1
1
8
1
Revision 1.6
Advertisement
Table of Contents
