ETC sensor+ CEM+ Configuration Manual page 44

values. Dimmer Doubling is only available for 120V systems.
Currently, Dimmer Doubling works in Advanced Patch mode only. To configure a dimmer
for Dimmer Doubling:
Step 1:
Step 2:
Step 3:
Step 4:
39
Property
Firing Mode
Curve
Threshold
Min. Scale Voltage
Max. Scale Voltage
Voltage Regulation
Preheat
Dynamic Preheat
DC Output Prevent
InRush Protect
Set the rack that contains the dimmer to Advanced Patch mode.
Set the dimmer's firing mode to DimDbl.
Re-configure your port settings and data loss behavior for that rack if they were
modified from the defaults.
Use advanced patch to patch your dimmers.
• You may need to re-patch all of the dimmers if you are not using the default
patch.
• You will need to patch the Dimmer Doubled side of the dimmer for each port
you are using (DMXA DD, DMXB DD, EDMX DD).
120V
DimDbl
Mod-Square
1%
6V
115V
Checked
Unchecked
0 sec.
Checked
Unchecked
Sensor+ Dimming System User Manual
230V
---
---
---
---
---
---
---
---
---
---