Table of Contents
Advertisement
Reference Manual
00809-0200-3412
2.5
Main display
2.5.1
Configuring the main display
The main display can be configured to meet your specific requirements.
Procedure
1. With the main display showing, press ENTER/MENU.
2. Choose Display Setup.
3. Move the cursor to Display setup and press ENTER/MENU.
4. Choose Configure main display.
Rosemount FCL 56
Important
Be sure to press APPLY once the box has been unchecked.
A message stating which sensors are in hold appears in the fault/warning banner at
the bottom of the display.
The main menu appears.
The screen below appears.
The screen below appears.
Display and operation
May 2019
17
Advertisement
Table of Contents
Troubleshooting
