Temperature - Emerson Rosemount FCL Reference Manual

Reference Manual
00809-0200-3412
Figure 3-3: Menu tree for the Measurement submenu
A. For FCL-02, choose Live/automatic. For FCL-01, choose manual and set manual pH to the
B. If the pH measurement is being made to correct the chlorine sensor reading, leave
3.4.2 Configure measurement settings
Complete the following steps to change the measurement settings on your 56
Transmitter.
Procedure
1. Move the cursor to the appropriate control box and make the desired setting.
2. For more information about the control the cursor is on, press INFO.
3. To close the information screen, press any key.
3.5

Temperature

3.5.1 Menu tree
Figure 3-4
Rosemount FCL 56
Sensor 1 (Cl)
Measurement
Units
1
pH correction
Filter
Dual slope calibration
expected pH of the process liquid.
solution temperature correction off.
is the Temperature menu tree.
Programming the transmitter
Measurement
Sensor 1 or 2
Sensor 2 (pH)
May 2019
Pre-amplifier location
Filter
Reference impedance
Wiring
Resolution
2
Solution temperature correction
25