Reset - Emerson Rosemount FCL Reference Manual

Calibrate
May 2019
2. Press INFO for an information screen to aid with troubleshooting if the calibration is
4.7

Reset

There are three resets.
1. Reset all user settings, including calibration and program settings, to the factory
2. Reset sensor calibration to the default value. The transmitter will clear all user-
3. Reset the analog output calibration for the selected output to the default value. The
Procedure
1. With the main display showing, press ENTER/MENU to display the main menu.
2. Move the cursor to Reset and press ENTER/MENU.
3. Check the desired boxes and press APPLY.
32
not acceptable.
default values. The transmitter will return to Quick Start.
Important
The event logger and data logger (see
unaffected.
entered calibration data for the selected sensor. It will leave all other user-entered
data unaffected.
transmitter will leave all other user-entered settings unchanged.
Data and event logging and
Emerson.com/Rosemount
Reference Manual
00809-0200-3412
retrieval) will be