Operation - Emerson Rosemount FCL Reference Manual

Reference Manual
00809-0200-3412
2.3

Operation

The operation of the Rosemount 56 Transmitter can best be understood from the
following example.
Procedure
1. With the main display showing
2. Press Down to move the cursor to Program.
3. Press ENTER/MENU.
4. To select a different program submenu, use Right to move the cursor to the desired
5. To enter the Outputs submenu, press Down.
Rosemount FCL 56
The main Menu, shown below, appears.
Important
Pressing the ENTER/MENU key will bring up the main Menu only if the main display
is showing.
Note that the current reading and temperature for sensor 1 ( S1 ) and sensor 2 ( S2 ),
if applicable, always appear at the top of the screen.
The cursor (dark blue backlit field) is on Calibrate.
The cursor is on Outputs, and the first screen in the Outputs submenu is showing.
tab and press ENTER/MENU.
The cursor moves to the first control box, Output. The Rosemount 56 has four
analog outputs, and this control lets you select which output to configure. The
default is output 1.
(Figure 2-1), press ENTER/MENU.
Display and operation
May 2019
13