Security - Emerson Rosemount FCL Reference Manual

Reference Manual
00809-0200-3412
Figure 3-5: Menu tree for the pH diagnostic setup submenu
3.6.2 Configure pH settings
Complete the following steps to set up the pH diagnostics on the Rosemount 56
Transmitter.
Procedure
1. Move the cursor to the appropriate control box and make the desired setting.
2. For more information about the control the cursor is on, press INFO.
3. To close the information screen, press any key.
3.7

Security

3.7.1 Menu tree
Figure 3-6
Rosemount FCL 56
pH diagnostics
Sensor 2 (pH)
Maximum allowed offset
Minimum allowed slope
Maximum allowed slope
Sensor diagnostics on/off
Ref fault high
Glass fault high
Glass impedance temp correction on/off
Glass impedance measurement method
is the Security menu tree.
Programming the transmitter
May 2019
Sensor diagnostics on
27