3.5
Electrical Specification
3.5.1
Supply Voltage
Following supply voltage is specified at the COM Express® connector:
VCC:
Standby:
RTC:
3.5.2
Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
following the ATX specification
3.5.3
Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
3.5.4
Power Consumption
The maximum Power Consumption of the different COMe-cBTi6R variants is 3.5 - 13.5W (100% CPU load on all cores; 90°C
CPU temperature). Further information with detailed measurements are available in Application Note KEMAP054 available
on
EMD Customer
17
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
- 5V Standby voltage is not mandatory for operation.
- Extended / Industrial Temperature (E1, XT, RXT) variants are validated for 12V supply only
Section. Information there is available after registration.
COMe-cBTi6R / Product Specification
4.75 - 20V
5V DC +/- 5%
2.5V - 3.47V