Table of Contents
Advertisement
3.0
4.0
| SPONGE-JET 70P 70E USER MANUAL
6
RECEIPT & INSPECTION
Upon receipt of your shipment, immediately check for damage; open all boxes
and crates to look for missing parts, and/or any abnormality, promptly notify
your appropriate carrier and Sponge-Jet, Inc.
INSTALLATION AND STARTUP
The 70E (electric model) is supplied with a single phase (PH-1), 115/230V, 1 HP
TEFC, 1725 RPM, 60Hz Electric Motor.
It is energized by a standard 2-pole electric switch.
The 70P (pneumatic model) is supplied with a variable speed, vane-style
pneumatic motor.
Maximum inbound pressure is 7 Bar (100 psi) with maximum 3539 Liters Per
Minute (125 Cubic Feet Per Minute) of clean Dry Compressed Air.
Advertisement
Table of Contents
Need help?
Do you have a question about the 70P Recycler and is the answer not in the manual?