Safety - Sponge-Jet 70P Recycler User Manual

1.0

SAFETY

Safety Labels
User Manual
Ear protection
Hazardous Voltage
Protective Earth Ground
Lockout/Tagout
Electrical Power
Failure to follow all Instructions in manual and any alterations made to
equipment following shipment from Sponge-Jet will void warranty. Direct
attachment, such as welding or bolting of any additional chutes or hoppers,
etc., to vibrating equipment other than those supplied by Sponge-Jet, Inc.
will automatically void warranty.
Any connection made to the unit must be flexible.
Before starting unit, operator must be certain unit is free to follow the
movement produced by the vibrating equipment.
In general, the feeding and discharge connections must have sufficient
clearance to prevent any contact.
Before Starting Unit:
The base must have a substantial foundation around the entire bottom of the
unit base ring. The base must be secured to floor or adequate support struc-
ture unless on casters. If, after unit has been started, there are secondary
vibrations to foundation or to separator base, unit must be reinforced. With
further questions, consult Sponge-Jet, Inc.).
The frames must be attached to the table.
Shipping lugs must be removed.
All guards and service doors must be In place.
Caution/Danger
Safety Gloves
Two Man Lift
Do Not Operate with
Guards Removed
Eye Protection
Respiratory Protection
SPONGE-JET 70P 70E USER MANUAL |
3