Modifying Wipe - Panasonic AV-HS6000 Series Operation Manual

[Off]
[On]
3
Set [Width], [Soft], and [Fill] in the [Border] column.
[Width]
[Soft]
[Fill]
@ NOTE
t When [Border] in the [Border] column is set to [On], the amount of soft effect set using [Soft] in the [Border] column is indicated as the ratio of soft
effect to the border width. To add only soft effect to a wipe, set [Border] in the [Border] column to [Off].
t When a waveform other than [WIPE] is selected from the <ME1>/<ME2> button on the top menu → [BKGD] → [BKGD Pattern] tab, the color set in the
[Border Color] column is applied even if [UTIL1] or [UTIL2] is selected in [Fill].
t When the following waveforms are selected, a border is not applied even if [Border] in the [Border] column is set to [ON].
- SQ: 47, 48, 49, 50
Setting the border color
When [Matte] is selected in the [Fill] column, the border color can be set.
1
Select the <ME1>/<ME2> button → [BKGD] → [Edge Border] tab.
2
Adjust the color.
f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.
Setting the background image
f Set the background image when the following pattern waveforms are selected.
- SQ: 47, 49, 51, 52, 53, 114
f The background image is output only when [4:3] or [4:3 Smooth] is selected on the top menu <ME1>/<ME2> button → [BKGD] → [Position] tab →
[Trim] column → [Trim] when SQ is set to 47 or 49.
1
Select the <ME1>/<ME2> button → [BKGD] → [Edge Border] tab.
2
Set [Base Video] in the [Base Video] column.
f Select an item from [Off] (black), [UTIL1], and [UTIL2].

Modifying wipe

1
Select the <ME1>/<ME2> button → [BKGD] → [Position] tab.
2
Select [Normal] or [Reverse] in the [Direction] column.
f This setting is linked with the <N>/<R> button. (page 25)
3
Select an item in [Normal/Reverse] in the [Direction] column.
f This setting is linked with the <N/R> button. (page 25)
[On]
[Off]
4
Select an item in [Pattern Limit] in the [Pattern Limit] column.
f This setting is linked with the <PATT LIMIT> button.
[Off]
[On]
5
Set [Size] in the [Pattern Limit] column.
Chapter 5 Basic Operations — Wipe
Does not add the border effect.
Adds the border effect.
Sets the border width.
Sets the amount of soft effect.
Select the image to fill in the border area from [Matte], [UTIL1], or [UTIL2]. When [Matte] is selected, the border color can
be set using [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.
[100]
[50]
[0]
[Y-Pos]
[−50]
[−50]
[−100]
[−100]
Wipes in the direction of the setting item.
Does not wipe in the direction of the setting item.
Does not restrict the amount of wipe transition for background transition. If the setting is changed from [On] to [Off],
transition is made according to the position of the fader lever at the time specified in [Return Time].
Restricts the amount of wipe transition for background transition.
[50]
[0] [100]
[X-Pos]
– 56 –
Inside the screen
Outside the screen