Key Decorations - Panasonic AV-HS6000 Series Operation Manual

[Off]
[0.5], [1.0], [1.5]
3
Set [Phase] in the [Adjust] column.
f Adjust the horizontal phase of the chroma key signal. The key signal position can be adjusted horizontally in 0.5 (half-pixel) increments.

Key decorations

Add a border, shadow, or other edge to the key.
Setting the key edge
[Border]
[Shadow]
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Select an item in [Type] in the [Edge] column. (Fig. 1)
[Off]
[Border]
[Drop]
[Shadow]
[Outline]
3
Set [Width] in the [Edge] column.
f Set the edge width.
4
Select an item in [Direction] in the [Edge] column. (Fig. 2)
f Set the direction to add [Drop] or [Shadow] effect in 45° increments.
5
Set [Density] in the [Edge] column.
f Set the edge density.
Setting the key edge fill
Set the source to be inserted as an edge.
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Select an item in [Fill] in the [Edge] column.
[Matte]
[UTIL1]
[UTIL2]
Setting the key edge color
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Adjust the color.
f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Edge Color] column.
Chapter 5 Basic Operations — KEY
Does not adjust the width of the chroma key signal.
Adjusts the width of the chroma key signal. The key signal width can be adjusted horizontally in 0.5 (half-pixel)
increments.
[Drop]
[Outline]
Fig. 1
Does not add an edge.
Adds a border around the entire edge.
Adds a diagonal border.
Adds a shadow.
Adds an outline (only a border with no fill).
Uses the color set in the [Edge Color] column.
Uses the image on the UTIL1 bus.
Uses the image on the UTIL2 bus.
[180]
(Left) [135]
[90]
– 70 –
(Top)
[225] [270]
[315] (Right)
[45] [0]
(Bottom)
Fig. 2