Assigning Signals To Buttons - Panasonic AV-HS6000 Series Operation Manual

Assigning signals to buttons

External video input signals and internally generated signals can be assigned to the crosspoint buttons (the PGM/A, PST/B, and KEY bus crosspoint
buttons) in the crosspoint area. All buses in a single Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 have a common assignment.
If the assignment of the signals selected by the crosspoint buttons is changed, the positions of the lit crosspoint buttons will be changed according to the
changed assignment. In this case, the output video is not changed.
1
Select the <CONF> button → [XPT ASSIGN] → [MainPanel]/[SubPanel1]/[SubPanel2] tab.
[MainPanel] tab
[SubPanel1] tab
[SubPanel2] tab
2
Select the buttons to assign the video sources from the button list in the left column.
f Select [Button Group] to filter the button list in the left column.
3
Select a signal to be assigned from the signal list in the right column.
f Select [Filter] to filter the signal list in the right column.
4
Select [Assign].
f The signal selected in step
5
Select [Insert].
f The signal selected in step
originally assigned to the previous button.
f The setting of the button assigned to [ME1PGM], [ME2PGM] does not change.
6
Select [Delete].
f The signal assigned to the button selected in step
f The setting of the button assigned to [ME1PGM], [ME2PGM] does not change.
@ NOTE
t The 24 buttons for each page are displayed in the left column. The settings for first 16 are applied when the Control Panel AV‑HS60C4 is connected.
r Signals that can be selected for the crosspoint buttons:
f "l" indicates selectable, and "―" indicates non‑selectable.
Signal name
SDI IN1 ‑ SDI IN32
DVI IN1, DVI IN2
ME1CLN, ME2CLN
ME1KEYPVW, ME2KEYPVW
ME1PGM, ME2PGM
ME1PVW, ME2 PVW
DSKPGM1, DSKPGM2
DSKPVW1, DSKPVW2
DSK1CLN ‑ DSK4CLN
SEL KEYPVW
Clip 1V ‑ Clip 4V
Clip 1K ‑ Clip 4K
Still 1V ‑ Still 4V
Still 1K ‑ Still 4K
CBGD1, CBGD2
CBAR
Black
MV1 ‑ MV4
2nd PAGE, 3rd PAGE
Blank
*1 Crosspoint buttons other than the <AUX 1/2> to <AUX 15/16>, <DISP>, and <VMEM F/S> buttons.
*2 <AUX 1/2> to <AUX 15/16>, <DISP>, and <VMEM F/S> buttons.
*3 ME1PGM and ME2PGM have a limitation on selection.
Ex) For ME1, ME1PGM cannot be selected. When ME1PGM is selected for ME2, ME2PGM cannot be selected for ME1.
*4 Used with the SHIFT function.
Chapter 7 CONFIG Menu — Assigning signals to buttons
Assigns the main control panel.
Assigns the sub control panel 1 (second Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4).
Assigns the sub control panel 2 (third Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4).
3
is assigned to the button selected in
3
is assigned to the button selected in
2
and the buttons after that will each shift one to forward. The last button will be Blank.
Description
SDI input signals 1 to 32
DVI-D input signal
Clean signal
Key preview video signal
Program video signal
Preview video signal
Program video signal
DSK preview video signal
Clean signal
Selected key preview video signal
Video memory (moving image) 1 to
4 videos
Video memory (moving image) 1 to
4 keys
Video memory (still image) 1 to 4
videos
Video memory (still image) 1 to 4
keys
Color background 1, 2
Color bar
Black image
MultiView display output signal
Page switching function
Not assigned
2
.
2
. The buttons after the button selected in step
ME*
1
l
l
l*
3
―
l*
3
―
―
―
―
―
l
l
l
l
l
l
l
―
l*
4
―
– 131 –
2
will be the signal that was
AUX*
2
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l*
4
―