Table of Contents
Advertisement
2. Functions in each area
AUX bus crosspoint buttons
These buttons are used to select the source of the bus which was selected by the AUX bus selector button (
).
Buttons 1 to 32 can be selected using the [SHIFT] button.
Refer to "3-1-2. Selecting the bus using the SHIFT function". (Operating Instructions in CD-ROM)
2-1-2. Wipe pattern/memory area
Wipe pattern and memory selector buttons
Wipe patterns 1 to 12 can be selected while the BKGD and KEY
pattern selector buttons (
) are lighted.
Data can be stored in the memories of buttons 1 to 10 or
recalled from these memories while one of the memory
operation buttons () — [SHOT MEM], [BKGD WIPE MEM],
[PinP MEM] or [CAM MEM] — is lighted.
BKGD, KEY pattern selector buttons [BKGD PATT] [KEY PATT]
Press the [BKGD PATT] button, and while it is lighted, select the wipe pattern for the background transition.
Similarly, press the [KEY PATT] button, and while it is lighted, select the wipe pattern for the key transition.
Each time the [BKGD PATT] button and [KEY PATT] button are pressed, the pattern page changes in the
following sequence: WIPE, SQ1 (squeeze 1), SL1 (slide 1), 3D1 (3 dimensions 1), SQ2 (squeeze 2), SL2
(slide 2) and 3D2 (3 dimensions 2). Which pattern page has been selected can be checked by observing which
pattern page indicator LED () is lighted.
SQ2, SL2, and 3D2 may not be selected as the wipe pattern for the key transition.
Pattern page indicator LEDs [PAGE]
By observing which pattern page indicator LED is lighted, it is possible to check which pattern page has been
selected by the BKGD PATT or KEY PATT selector button (
).
Memory operation buttons [SHOT MEM] [BKGD WIPE MEM] [PinP MEM] [CAM MEM]
Press the [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] button to perform the memory
operations for the number keys (1 to 10).
[STOR]:
Press this to register data in the memory.
[RECALL]:
Press this to recall data from the memory.
[DEL]:
Press this to delete data in the memory.
[UNDO]:
Press this to undo the operation of the [RECALL] or [DEL] button.
The number of operations that can be undone is one only.
This operation cannot be performed using memory operations when the [CAM MEM] button has been
pressed.
[STOR] [RECALL] [DEL] [UNDO]
19
SHOT
1
2
STOR
MEM
1
2
3
BKGD
RE
WIPE
4
5
CALL
MEM
4
5
6
PinP
DEL
MEM
7
8
7
8
9
CAM
UNDO
10
11
12
MEM
10
XPT DSBL EFF DSLV
MEMORY / PATTERN
PAGE
3
WIPE
SQ1
SQ2
6
SL1
SL2
3D1
3D2
BKGD
9
PATT
KEY
PATT
Advertisement
Chapters
Table of Contents
