Selecting The Fill Type; Selecting The Usk Source; Setting The Usk Insert - Panasonic AV-HS6000 Series Operation Manual

2
Select an item in [Source Type] in the [USK] column.
f Select the mode to link selection of key source signal with key fill selection. The selection status is stored for each source signal.
[Self Key]
[External Key]

Selecting the fill type

Select the fill type.
1
Select the <DSK MISC> button → [USK] → [USK1] to [USK4] tabs.
2
Select an item in [Fill] in the [USK] column.
[Bus]
[Matte]
Setting the matte color
Set the fill matte color.
1
Select the <DSK MISC> button → [USK] → [USK1] to [USK4] tabs.
2
Adjust the color.
f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Fill Matte] column.

Selecting the USK source

Select the key fill and key source signals to be used as USK sources.
1
Select the <DSK MISC> button → [USK] → [USK XPT] tab.
2
Select USK bus from the USK bus list on the left column.
f Select [USK] to filter the bus list in the left column.
3
Select signals.
f Select a signal to be assigned to the USK bus from the signal list on the right column.
f Signals available on the USK bus are as follows.
Signal name
SDI IN1 - SDI IN32
DVI IN1, DVI IN2
Still 1V, Still 2V, Still 3V, Still 4V
Still 1K, Still 2K, Still 3K, Still 4K
Clip 1V, Clip 2V, Clip 3V, Clip 4V
Clip 1K, Clip 2K, Clip 3K, Clip 4K
CBGD1, CBGD2
CBAR
Black
f Select [Filter] to filter the signal list in the right column.
4
Select [Assign].
f The signal is assigned to the USK bus selected in the step

Setting the USK insert

Perform USK settings for each input signal.
1
Select the <DSK MISC> button → [USK] → [USK Insert] tab.
2
Select signals.
f Select the signal you want to perform USK settings on from the signal list on the left column.
f Select [Filter] to filter the signal list on the left column.
f Signals that can be combined with a USK source are as follows:
Signal name
SDI IN1 - SDI IN32
DVI IN1, DVI IN2
Still 1V, Still 2V, Still 3V, Still 4V
Still 1K, Still 2K, Still 3K, Still 4K
Clip 1V, Clip 2V, Clip 3V, Clip 4V
Clip 1K, Clip 2K, Clip 3K, Clip 4K
Chapter 5 Basic Operations — USK (Upstream key)
Uses the source selected in the key fill bus column as the key source signal.
Always uses an external key. The source signal for fill is set using [Fill] in the [Key] column.
Uses the bus signal for the key fill signal.
Uses the internal fill matte for the key fill signal. The color set in the [Fill Matte] column is used for the fill matte color.
SDI input signals 1 to 32
DVI-D input signals
Video memory (still image) 1 to 4 videos
Video memory (still image) 1 to 4 keys
Video memory (moving image) 1 to 4 videos
Video memory (moving image) 1 to 4 keys
Color background 1, 2
Color bar
Black image
2
.
SDI input signals 1 to 32
DVI-D input signals
Video memory (still image) 1 to 4 videos
Video memory (still image) 1 to 4 keys
Video memory (moving image) 1 to 4 videos
Video memory (moving image) 1 to 4 keys
Description of signal
Description of signal
– 82 –