Setting The Gpi Input/Output - Panasonic AV-HS6000 Series Operation Manual

Setting the GPI input/output

Set the GPI input/output port of the Main Frame AV-HS60U1/AV-HS60U2, Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
Setting the GPI input port
Functions can be assigned and externally controlled through the GPI input ports.
f The GPI input ports are the pins 1 to 18 of the <GPI IN> terminal on the Main Frame AV-HS60U1/AV-HS60U2, and the pins 1 to 8 of the <GPI I/O>
terminal on the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4. (page 169)
1
Select the <SYS> button → [PERIPHERAL] → [GPI IN] tab.
2
Select [ID] and select an item.
f Select [Mainframe], [MainPanel], [SubPanel1], or [SubPanel2] as the setting target.
3
Select the port where you want to assign a function from the port list in the left column.
f Select [Select] to filter the port list in the left column. You can select [All], [GPI In1‑6], [GPI In7‑12], or [GPI In13‑18].
4
Select the function to assign from the function list in the right column.
f The input signal type can be selected from the right column function list by selecting [Type]. Type is limited by the function.
- [LowEdge]: Falling edge
- [HighEdge]: Rising edge
- [LowLevel]: Low level
- [HighLevel]: High level
f Select [Group Select] to switch the group of the function list in the right column.
For details, refer to "GPI input function list" (page 154).
5
Select [Assign].
f The function is assigned to the button selected in the step
f Select [Test Fire] to test the signal input operation of the set GPI port.
r GPI input function list
[Group Select]
[ME1], [ME2]
[DSK]
[USK]
[OTHER]
[Macro]
@ NOTE
t When a plug-in software application is introduced, there are cases where functions inherent to that application are added as functions to be assigned.
Setting the GPI output port
GPI output functions and tally outputs can be assigned and externally output through the GPI output port.
f The GPI output ports are the pins 1 to 48 of the <GPI OUT1>/<GPI OUT2> terminal on the Main Frame AV-HS60U1/AV-HS60U2, and the pins 1 to 10
of the <GPI I/O> terminal on the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4. (page 169)
1
Select the <SYS> button → [PERIPHERAL] → [GPI OUT] tab.
Chapter 8 System Menu — Setting the external connection
2
.
Signal name
KEY1 ON to KEY4 ON
KEY1 CUT to KEY4 CUT
AUTO
CUT
KEY1 ON to KEY4 ON
KEY1 CUT to KEY4 CUT
USK1 ON - USK4 ON
No Assign
REC Still1 to REC Still4
REC Clip1 to REC Clip4
PLAY Clip1 to PLAY Clip4
STOP Clip1 to STOP Clip4
FTB
Tally G1 DSBL
Tally G2 DSBL
Tally G3 DSBL
Tally G4 DSBL
Macro1-1 - Macro9-9
Play Cancel
Play Resume
Description
Executes the transition for KEY1 to
KEY4.
Executes the cut transition for KEY1 to
KEY4.
Executes the auto transition.
Executes the cut transition.
Executes the cut transition for DSK1 to
DSK4.
Executes the cut transition for DSK1 to
DSK4.
On/off of USK1 ON to USK4 ON.
No function assigned
Still recording
Clip recording start
Clip playback start
Clip recording stop or playback stop
FTB transition start
[Tally Group1] tally signal is not output
[Tally Group2] tally signal is not output
[Tally Group3] tally signal is not output
[Tally Group4] tally signal is not output
Playback of the applicable macro
register memory (one out of 1-1 to 9-9).
Canceling of the macro playback.
Resuming of the paused macro
playback.
– 154 –
[Type]
[LowEdge] or [HighEdge]
[LowEdge] or [HighEdge]
[Low Edge] or [High Edge]
―
[LowEdge] or [HighEdge]
[LowLevel] or [HighLevel]
[Low Edge] or [High Edge]