Basic Operations For The Multi-Selection Panel Area; Background Wipe Preset Menu - Panasonic AV-HS6000 Series Operation Manual

Basic operations for the multi‑selection panel area
The multi-selection panel area is a color liquid crystal panel with buttons, which integrates wipe pattern selection and various memory operations.
1 Mode selection button
Switches the mode using the buttons at the right side of the multi-selection panel area.
2 Multi‑selection menu panel
S1 ‑ S3
1 ‑ 12
@ NOTE
t You can also swap ME areas through the multi-selection panel area. For details, refer to "Switching the ME area in the Control Panel AV-HS60C1/
AV-HS60C2/AV-HS60C4" (page 137).

Background wipe preset menu

Press the <BKGD WIPE> button on the multi-selection panel area to display the background wipe preset menu.
Nine background wipe preset patterns can be stored for each ME.
The wipe setting used in the corresponding ME is always stored to the pattern button selected in the pattern selection menu. If another pattern button is
selected, the wipe pattern and setting values stored previously are retrieved.
r Pattern selection menu
Press the <BKGD WIPE> button on the multi-selection panel area to display the pattern selection menu.
S1 [ME1], [ME2]
S2 Current pattern
S3 [ROT]
1 ‑ 9 Pattern 1 to pattern 9
NOTE
@
t The selection button for the background wipe preset menu in the multi-selection panel will move to top left (pattern 1) when shot memory or event
memory is played back.
Chapter 4 Preparations — Basic operations for the multi‑selection panel area
1
2
This is the status area of the menu. Displays and functions differ by menu. Depending on the menu, perform operations
with the button which appear on S1 or S3 area.
Consists of 12 button sets of 3×4. Displays and functions differ by menu.
S1 S2 S3
1 2 3
4 5 6
7 8 9
10 11 12
Pattern selection menu
Displays the ME of the operations target.
Displays the current background wipe pattern.
Rotates the wipe pattern by 90° or 180°. There will not be any changes if you
selected a rotation-disabled pattern.
Selects the background wipe preset pattern.
– 40 –