Menu Delegation Function; Enabling/Disabling The Menu Delegation Function; Menu Delegation Function List - Panasonic AV-HS6000 Series Operation Manual

Menu delegation function

When a button on the Control Panel is double-clicked, the menu screen displayed on the Menu Panel AV-HS60C3 or the multi-selection panel area can
be switched.
At the same time, the normal operation activated when the button is pressed is also executed.

Enabling/disabling the menu delegation function

Enable/disable the menu delegation function at the Menu Panel AV-HS60C3 and the multi-selection panel area separately.
1
Select the <SYS> button → [CTRL PANEL] → [Main Panel]/[SubPanel1]/[SubPanel2] tab.
2
Select an item in [MenuPanel] or [Select Panel] in the [Delegation] column.
[On] button
[Off] button

Menu delegation function list

Button
Button position Operation target button
<KEY1 F/S>, <KEY2 F/S>, <KEY3
F/S>, <KEY4 F/S>
<MCRO>
<IMAG> of A bus
Crosspoint area
<IMAG> of B bus
<CBGD1>*, <CBGD2>*
<DSK1 F/S> - <DSK4 F/S>
<VMEM F/S>
<DISP>
<STILL1 V/K> - <STILL4 V/K>*
<CLIP1 V/K> - <CLIP4 V/K>*
<KEY1> - <KEY4>
<BKGD>
<WIPE>
Transition area <EMEM LINK>
<MCRO ATCH>
<PATT LIMIT>
<AUTO>
KEY operation area <KEY1> - <KEY4>
DSK operation area <DSK1> - <DSK4>
Chapter 4 Preparations — Menu delegation function
Enables the menu delegation function.
Disables the menu delegation function.
Transition menu of the Menu Panel AV‑HS60C3
f When the key type is [Lum]/[Linear]/[Full]
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [Key Setting] tab
f When the key type is [Chroma]
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [Chroma] tab
f When PinP is enabled
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [PinP Adjust] tab
The <MEM> button on the top menu → [MACRO] → [XPT
Assign] tab
The <ME1>/<ME2> button on the top menu → [IMAGE] →
[BKGD] tab → [A Effect1] column
The <ME1>/<ME2> button on the top menu → [IMAGE] →
[BKGD] tab → [B Effect1] column
The <DSK MISC> button on the top menu → [CBGD] →
[CBGD1]/[CBGD2] tab → [Main Color] column
The <DSK MISC> button on the top menu → [DSK1] to
[DSK4] → [Setting] tab → [DSK Adjust] column
The <MEM> button on the top menu → [STILL] → [Still] tab
Switches to the split display in which the image selected in the
DISP bus and the WFM/VECT are displayed.
The <MEM> button on the top menu → [STILL] → [Still] tab
The <MEM> button on the top menu → [CLIP] → [Play Clip1]
to [Play Clip4] tabs
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [Transition] tab → [In Type] column
The <ME1>/<ME2> button on the top menu → [BKGD] →
[Transition] tab
The <ME1>/<ME2> button on the top menu → [BKGD] →
[Edge Border] tab
The <MEM> button on the top menu → [EVENT MEMORY] →
[Register] tab
The <MEM> button on the top menu → [MACRO] → [Macro
Attach] screen
The <ME1>/<ME2> button on the top menu → [BKGD] →
[Position] tab → [Pattern Limit] column
The <ME1>/<ME2> button on the top menu → [BKGD] →
[Transition] tab
f When the key type is [Lum]/[Linear]/[Full]
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [Key Setting] tab
f When the key type is [Chroma]
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [Chroma] tab
f When PinP is enabled
The <ME1>/<ME2> button on the top menu → [KEY1] to
[KEY4] → [PinP Adjust] tab
The <DSK MISC> button on the top menu → [DSK1] to
[DSK4] → [Setting] tab
– 45 –
Transition menu of the multi‑
selection panel area
―
―
―
―
―
―
―
―
Selection of the register memories
([STILL1] to [STILL4])
Selection of the register memories
([CLIP1] to [CLIP4])
―
―
Selection of the BKGD WIPE
waveform
Selection of the event memories
―
―
―
―
―